Going "green" is everywhere and has been in the forefront for a few years now.  We've seen all the suggestions on how to conserve water, produce less trash, recycle, weed out plastic from our lives, etc.  How can a motorist be "green" with respect to their vehicle?  We've taken the guess work out of it and listed some suggestions below.  These "earth-friendly" car habits are simple and can be performed by every motorist out there.  It all comes down to timely maintenance and non-aggressive driving ;)

First off, slow down.  Speeding and hard accelerations waste fuel.  Use the cruise-control on highways to maintain a steady speed, thus saving fuel and lowering emissions.  

Lighten the load.  Try to remove unnecessary items from the vehicle to reduce weight.

Keep your tires properly inflated and aligned.  Under-inflated tires waste fuel by forcing the engine to work harder to propel your vehicle down the road.  Even more so, properly maintained tires last longer, saving you money and lessening landfill waste.

Keep your engine running at its peak.  A simple misfiring spark plug can decrease fuel efficiency as much as 25%.  Never ignore your check engine light, it could indicate something going on with your emissions system, adding too the ever growing problem with emission pollution.  Another way to lessen your contribution is to recycle used oil and antifreeze if you have some at home.  You can call your local repair facility or government to find out where you can recycle fluids.

Routine maintenance is key.  This will make your vehicle last longer, get better gas mileage, emit less emission (with properly running engine), and keep its resale value for the future.  

If you're looking for a great auto repair facility in the San Diego area, give us a call The Dyno Shop, 619-562-3933.  We are here to help with all your automotive repair needs.

​

When we examine the topic of burning gasoline or diesel fuel, there are only a number of things that actually play a meaningful part in the reduction of gas mileage to point of being noticeable.  There are a number of reasons to blame for your gas mileage not being what it used to - the gasoline you are using might be different and contain more ethanol, the conditions in your engine or fuel system may have changed causing your vehicle to be less efficient in converting the fuel energy, or you might be driving differently maybe a bit more aggressive or more city instead of highway driving.  The biggest culprit that has been discovered over the last century of driving is carbon deposits in older vehicles.
Your vehicle can develop deposits in the fuel system leading up to the engine, in the fuel injectors themselves, or on other critical components such as the oxygen sensor or the EGR valve.  It is the fuel filters job to filter these deposits out before the fuel reaches combustion, if not this will effect the mileage and emissions.  Fuel Injector deposits effect mileage by impairing the injector to spray an efficient nice fine mist that can burn at the optimal rate.  The deposit in the injector causes the spray to be more like a dribble in both gasoline and diesel engines, affecting the air/fuel mixture and how much actually gets used during combustion. 
In all of the scenarios your engine is not running at it's best.  These deposits form usually from gasoline or diesel that hasn't been fully burned.  The incomplete by-products settle and typically morph over time into carbon molecules that have been cooked.  The best way to prevent deposits of any kind is with additives that deal with the deposits as they form or remove pre-existing ones.  Gasoline and diesel have detergent requirements; diesel doesn't have one, which is why additives are in high demand; gasoline's detergent level is mandated by the Government.  But research has shown that the lowest acceptable quantity detergency often isn't enough.  

So now you're asking yourself, how can The Dyno Shop help?  Let me tell ya.  First we can check all or most of these components for deposits.  We offer a top engine clean, injector flow testing and clean/rebuild, as well as suggestions for which additive would be best.  Along with these services, we would suggest having the tire pressure checked, replacement of the air and fuel filters, spark plugs gap checked and possible replacement, cap and rotor replaced (on carburetor vehicles), Oxygen Sensor examined and to check to make sure you have a good flowing muffler.  

For more information or if you have any question, give us a call 619-562-3933!!